1/8 RC8B3 Factory Team Nitro 4WD Kit

Chassis: 7075-T6 aluminum, 0.12" (3mm) thick
Drive: Four wheel with front and rear universal drive shafts
Gearboxes: 3.38:1 internal ratio with easy access to differentials
Shocks: 16mm Big Bore hard anodized aluminum, 0.14" (3.5mm) diameter
TiN coated alloy shock shafts, silicone shock oil
Shock Towers: 7075-T6 aluminum
Suspension: Pillow ball front uprights for increased adjustability
and improved durability, refined geometry with hinge pin inserts
for easy roll center adjustments
Body: Pro-Line RC8B3 clear body with Team Associated molded black
plastic wing, lightweight one-piece wing mounts
Radio Tray: Carbon fiber with sealed receiver box
Brake: Bonded pads and machined steel rotors
Fuel Tank: Molded plastic construction with splash guard
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis, caster blocks adjust 14, 16, or 18 degrees with molded
inserts
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

RC8B3 Team Buggy Kit with Clear Body, Fuel Tank, Shocks, Decals and
Shock Oil, Diff Oil, Air Filter and Instruction Manual

Radio: 2-channel with high torque steering servo
Engine: .21 cu in rear exhaust
Receiver Pack: 4.8 - 7.4V flat, LiPo, LiFe or NiMH
Wheels: 1/8 scale buggy
Tires: 1/8 scale buggy
Fuel: Model car blend, 30% nitro recommended
Glow starter, fuel bottle, starter box, tools and track equipment

Vehicle;
Length: 19.2" (488mm)
Width and weight vary with engine, exhaust, wheels and tires used in
the finished kit
Wheelbase: 12.8 - 13" (325 - 330mm)
Internal Gear Ratio: 3.38:1
Body;
Length: 16.2" (412mm)
Width: 7.5" (190mm) at widest point
Height: 3.6" (91mm)