Traxxas Disruptor High Performance 4-Speed Race Boat, Pink

The all-new 4s Disruptor is the one boat that holds nothing back. The fun begins when you pin the throttle and Disruptor launches hard on its way to 40+MPH on a single 4s LiPo battery. At 26″ long, Disruptor is perfectly sized to be quick and agile on small ponds and stable in open water. Disruptor is purpose-built by Traxxas for the wildest stunts and unstoppable fun—all with Rapid Right self-righting security.

• 26″ Deep-V Hull
• Made from lightweight injection-molded ABS
• Internal buttresses and bracing
• Pre-applied graphics
• Modular electronics tray
• Foam bow insert
• Rigid Injection-Molded Clipless Hatch
• Four quick-release hatch nuts with tool
• Foam seal to repel water
• Includes optional wingnuts
• 40+MPH with Single 4s LiPo Battery
• TQ 2.4 GHz Transmitter
• Full-size 2-channel transmitter
• All-day comfort with precise long-range control
• 3-channel micro receiver with fail-safe security
• Patented waterproof receiver box
• Rapid Right Self Righting
• Rights an overturned boat almost instantly
• Requires no special skills
• VXL-4s Marine Speed Control
• Water-cooled aluminum heat sink
• Innovative waterproof design
• Programmable Drive Profiles
• Sport Mode - forward / brake / reverse
• Training Mode - 50% forward / brake / 50% reverse (patented)
• Built-in two-stage low-voltage detection for LiPo batteries
• LiPo battery packs: 2-4 cells (7.4 to 14.8 volts)
• Brushless outrunner Motor
• 14-pole outrunner design
• Ultra high-temperature sintered Neodymium magnets
• Efficient, high-speed ball bearings
• Optimized for power in marine applications
• 5 mm output shaft
• Extra-Long 180 mm Battery Tray
• Centralizes battery weight
• Accommodates multiple battery sizes
• Secure hook-and-loop straps
• Driveline
• Direct drive 0.15-inch flex cable
• Quick-release motor collet
• Blue-anodized aluminum drive strut
• Low-maintenance bushings
• Steering
• High-torque waterproof 2056 servo
• Blue-anodized aluminum rudder
• Precision-Cut Stainless Steel Trim Tabs and Turn Fins
• Stainless Steel Hex Hardware Used Throughout

Hull Type: Deep-V
Hull Length: 26.22 inches (666 mm)
Overall Length: 29.76 inches (756 mm)
Beam: 7.64 inches (194 mm)
Height: 5.91 inches (150 mm)
Deadrise: 25 degrees
Weight (no battery): 3.66 pounds (1.66 kg)
Speed Control: VXL-4s Marine electronic speed control
Motor (electric): 14-pole brushless outrunner
Cooling: Independent dual-inlet water cooling
Hull Material: Injection-molded ABS
Drive System: Direct drive 0.15-inch flex cable
Prop: 42 mm 2-blade composite (59 mm pitch)
Outdrive: Anodized aluminum
Steering Servo: 2056 waterproof
Radio System: TQ 2.4 GHz (2-channel)
Receiver: 6519 2.4 GHz 3-channel
Skill Level: 2
Battery Compartment (L/W/H): 180 mm long x 49 mm wide
Required Batteries: 4 “AA” (transmitter), Boat (see battery finder)
High Performance Prop:
Disruptor’s prop gets the boat on plane quickly to reach maximum speed with the least current draw. Traxxas engineers tested countless prop configurations to find the perfect balance of performance, efficiency, and durability. Molded composite construction makes the prop light and tough, with no balancing or sharpening required.

High Strength Aluminum Hardware:
Disruptor’s rudder and drive strut are machined from tough 6000-series aluminum for maximum strength and then anodized vivid blue for that unmistakable Traxxas look. The drive strut uses special oiled bushings for corrosion-free performance.

Stainless Steel Hex Hardware:
Disruptor uses corrosion-resistant stainless-steel and nickel-plated screws and hardware throughout for good looks, easy maintenance, and long-lasting performance.

Stainless Steel Trim Tabs and Turn Fins:
Dual trim tabs and turn fins are critical to Disruptor’s high-speed performance. The parts are precision die-cut and bent from stainless steel to resist corrosion as they provide aggressive cornering 'bite' and the proper hull attitude for extreme speed.

Dual Water Inlets and Outlets:
Dual water pickups in the hull route cooling water to the motor and ESC independently. A streamlined dual-outlet plate on the transom evacuates water from the rear of the boat.

Clipless Latching System:
Disruptor comes outfitted from the factory with heavy duty, low-profile hatch nuts to keep the rigid ABS hatch securely fastened. Just a quick turn with the included hatch nut tool gives you full access to the hull. Disruptor also includes a set of optional wingnuts for quick toolless installation and removal.

Factory Applied Graphics:
Disruptor’s bold graphics make a statement on the lake, with a custom look even pro painters can't match. No painting is required; all the graphics are pre-applied to get Disruptor out of the box and into the water with speed and style.

26″ Deep-V Hull:
Disruptor is perfectly sized for fun with a light and maneuverable 26″ hull. The deep-V hull design adds extra stability on choppy water and gets on plane quickly and efficiently for maximum acceleration and speed.

Flex Cable Drive System:
Originally designed for outrageous 6s power, Disruptor’s flex cable drive system is efficient, reliable, and ready for all day fun. Disruptor’s electronics tray moves the motor further back towards the transom for a shorter and more direct path to the prop.

High-Torque Waterproof Servo:
Disruptor requires a powerful steering servo for responsive performance, and Traxxas delivers with the 2056 high-torque servo. O-ring seals make the servo completely waterproof, and there's plenty of steering muscle with 80 oz-in of torque at your command.

Quick-Release Flex Cable:
A clamping collet holds Disruptor’s flex cable tightly and centers it perfectly with the motor's output shaft for smooth, efficient operation. The collet releases quickly with a twist of the included wrenches for easy maintenance. Once loosened, the prop and flex cable simply slide out, making it easy to keep your Disruptor running in peak form.

3-Channel Receiver with Fail-Safe Security:
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.

Brushless Outrunner Motor:
Disruptor’s brushless outrunner motor is optimized for maximum power and high-RPM efficiency in marine applications with ultra high-temperature sintered neodymium magnets, a precision-balanced rotor, and high-speed ball bearings.

Sealed Receiver Box:
Traxxas' patented waterproof receiver box routes wires neatly through a special watertight seal. A blue O-ring allows easy access to the receiver box without losing its sealing properties.

Waterproof Electronics:
Waterproof electronics are a must in a marine environment. Traxxas electronics are fully waterproof (not just water resistant). The speed control, servo, and receiver all feature rugged waterproofing protection for dependable operation you can count on.

VXL-4s Marine Speed Control:
The VXL-4s Marine ESC uses a single 4s 14.8-volt LiPo battery for maximum 40+MPH speed (also compatible with 3s and 2s LiPo batteries). The VXL-4s Marine features an oversized aluminum heat sink with integrated water cooling for reliable all-day performance. Traxxas’ patented Training Mode can be used to limit power to 50% for new drivers.

Built-In Flotation:
Disruptor’s built-in foam flotation ensures the boat stays afloat under adverse conditions. In addition to making Disruptor virtually unsinkable, the fitted foam insert adds extra rigidity to the bow.