Tekin RS Gen2 Sensored Brushless 17.5T ESC/Motor Combo

The Tekin RS legacy continues with the GEN2 brushless speed control, the next generation in intelligent motor drive technology. The RS GEN2 is fitted with state of the art components to deliver what racers demand; reliability, precise control and unmatched power handling capability. Packed with updates, the RS GEN2 features a programmable 6.0-7.4V high-voltage BEC, an EZ Access Port for HotWire communication and Data-logging capabilities, and its all wrapped up in a pint sized package. Rated for 8.5 turn motors and higher, the GEN2 is the perfect ESC for both vetran and novice racers.

Tekin's Gen2 series motors carry forward engineering principles and performance benchmarks set by the Tekin Redline name. The Gen2 Redline Sensored Motor incorporates the latest technology advancements in brushless motor design and manufacturing, giving you the torque and RPM you want every time you pull the trigger. On Road or Off, Tekin's Gen2 Sensored motors give you an edge over your competition and deliver smooth power throughout the entire RPM range.

• ESC Features:
• Ultra-smooth and Precise Throttle and Braking Control
• Compatible with Sensored/Sensorless Brushless and Brushed Motors
• Easily Access Programming, Anywhere, Anytime
• Datalogging Capability
• High Voltage Programmable BEC
• EZ Access HotWire Programming Port
• HotWire PC Interface for Advanced Programming and Updating
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• HDAC: High Density Copper PCB's
• Sensor Plug for Precise Commutation with all Motors
• Gold-plated Solder Posts for Easy Wire Replacement
• Self Test Diagnostics and Factory Reset
• Pit Tune Mode
• DGF2: Digital Glitch Filtering V2
• QuickTune™ Programming
• One-Touch Radio Calibration
• ESC Programming Features:
• High Voltage BEC (6.0v/7.4v)*
• Drag Brake (13 steps)
• Brake / Reverse Strength (13 steps)
• Current Limiter (none + 12 steps)
• Neutral Width (13 steps)
• Timing Profiles (5 preset - 2 custom*)
• Adjustable Throttle and Brake Minimums
• Custom Throttle Curves
• Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
• Voltage Cutoffs (none, 2S, 3S, Custom)
• Timing Boost and Turbo when used with Hotwire
• ROAR Race Spec "Blinky" Mode
• Save, Load and Share custom ESC setup files
• Extensive Tuning via Tekin HotWire PC Interface
• Motor Features:
• CNC Machined T 6061 Billet Aluminum Heatsink Can
• Neodymium Sintered Magnet
• Precision Engineered for Maximum Energy Conversion
• High Purity Copper Windings Maximize Conductivity
• Low Resistance, High Power Solder Tabs
• Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
• Anodized Endbell plates maximize corrosion and wear resistance
• High RPM precision bearings
• Rebuildable Design
• Solderless Sensor PCB replacement
• Adjustable Timing

* NOTE: Requires HotWire USB Interface (TEKTT1450) - Sold Separately
- ESC Specifications -
Controls: Forward/Brake/Reverse
Input Voltage: 4-9 Cells, 2S-3S Lipo
BEC: 6.0v / 7.4v 5.5amps
Motor Limit Brushless Mode: 8.5 Turn, 540 2-pole (36mm)
Motor Limit Brushed Fwd Only Mode: 10 Turn
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1x1.3x.51" (25.4x33x12.9mm)
Weight: 2.0oz / 48g w/wire
- Motor Specifications -
Turn: 17.5
kV: 2400
Rotor: 12.5mm
Weight: 6.3oz (180g)
Shaft Dimensions: 3.2x15.3mm
Motor Diameter: 35.85mm/1.40"
Motor Length: 51.8mm/2.03"
Bearing Dimensions:
Front: 4x13x5mm
Rear: 1/8x3/8x5/32"