Tamiya 1/10 4WD XV-02 PRO Chassis Rally Car Kit

The XV-01 Pro incorporated a 4WD belt drive system with clever positioning of the RC electronic components with debris protection compartments. The all-new XV-02 Pro takes its 4WD drivetrain into a different direction by using a shaft-driven system with front mid-ship motor placement that incorporates equal length front and rear propeller shafts!

• Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice-versa for drive balance bias to rear.
• Features newly-designed parts such as: gears, bathtub frame chassis, chassis cover, caster blocks featuring 6-degree caster angle (XV-01 chassis - 10-degree caster angle), and bumpers with skid angles to reduce surface contact.
• The motor mount, propeller shafts, input and center shafts, and urethane bumpers have new metal parts.
• Features a longitudinal battery pack position in the center-left for optimum balance.
• Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance. (Over-Drive and Under-Drive Adjustment)
• Long aluminum dampers are employed at front and rear.
• A polycarbonate chassis cover with wheel well liners help prevent dirt and dust from getting inside.
• Suspension arms and front uprights are based upon the XV-01 chassis kit.
• Comes with rally block tires and wheels.

Ball Bearings: Includes full ball bearings
Battery: Sold Separately
Charger: Sold Separately
Chassis: Bathtub Chassis, FRP Fiberglass Reinforced Plastic
Completion Level: Kit
Differential: oil-filled gear differential for both front and rear
Drive Type: Forward/Brake/Reverse
Drivetrain: 4WD
Gear Ratio: 9.58: 1
Power Type: Electric
Length: 14.4882" (368 mm)
Width: 7.08661" (180 mm)
Radio: Sold Separately
Receiver: Sold Separately
Scale: 1/10
Servos: Sold Separately
Shock Type: Aluminum cylinder long oil damper
Speed Control: Sold Separately
Suspension: 4-wheel double wishbone
Vehicle Size: Standard
Vehicle Type: Rally Car
Wheelbase: 10.1181" (257 mm)