RC8B3e Team Kit

Chassis: Hard anodized 7075 aluminum
Drive: Four wheel shaft driven
Gearboxes: Bevel gear type with 3.38:1 ratio, and fast access
differentials
Shocks: 7075-T6 aluminum 16mm Big Bore with TiN coated 3.5mm shafts
larger diameter precision springs and optimized bladders for more
precise volume compensation
Shock Towers: 7075-T6 aluminum
Suspension: Front has pillow ball uprights for increased
adjustability and durability, refined suspension geometry with
lower hinge pin inserts for easy roll center adjustments
Motor Mount: Two-piece sliding design for easy motor removal and gear
mesh adjustment
Body: ProLine RC8B3e clear body with Team Associated molded wing, and
lightweight wing mounts with height and forward positioning
adjustments
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

RC8B3e Team Buggy Kit with Shocks, Body, Wing, Instruction Manual

Radio: 2-channel with high-torque steering servo
Motor & ESC: Brushless type for 1/8 scale buggies
Battery: 4S LiPo
Battery Charger: To match selected battery
Wheels and Tires: 1/8 scale buggy
LiPo charging bag, glue, tools
Polycarbonate safe spray or brush-on paint

Vehicle;
Length: (488mm)
Width and weight vary with engine, exhaust, wheels and tires used in
the finished kit
Wheelbase: 12.9" (327.3mm)
Tray Dimensions: 5.7 x 2 x 0.79" (145 x 51 x 20mm)
Body;
Length: 15.5" (394mm)
Width: 7.5" (190mm)
Height: 3.9" (99mm)