• Attention: Please allow additional time for shipping with USPS. If delivery time is critical, please consider using UPS at checkout.

Welcome to Larry's Performance R/C's Online

Protek RC 2S 200C 7.6V 8800mAh Si-Graphene Drag Shorty Lipo Battery, 8mm


LOADING IMAGES
Protek RC 2S 200C 7.6V 8800mAh Si-Graphene Drag Shorty Lipo Battery, 8mm
$169.00
This is a Protek RC part #PTK-5135-22, 2S 200C 2s5p 7.6V 8800mAh Si-Graphene Drag Race Shorty LiPo Battery with 8mm Connectors

Availability: Please call for availability
We might still have one laying around..

* Some of the items on this site are still being inventoried if you want to confirm the item is in stock please contact us.
Overview

Overview

The ProTek RC 2S 200C 2s5p Si-Graphene Drag Race Shorty LiPo Battery has been designed for RC No Prep Drag Racing enthusiasts who demand the most from their systems. ProTek RC was tasked with developing a LiPo battery capable of delivering extremely high power with blistering fast ET's. Needless to say, this pack delivers. Using a 2s5p cell configuration with a 200C burst rate, the ProTek Drag Race LiPo can hold up to the extreme voltage drops found in most high power, low turn drag setups. Get the ProTek RC 2S Si-Graphene Drag Race LiPo and run a battery that was made to win!

The cell configuration combined with a higher capacity allows this pack to remain more stable pass after pass. Large 8mm bullets keep power hungry ESC's happy while ensuring maximum connectivity. The improved design and efficiency of this pack will aid in lower operating temperatures and lower internal resistance. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off.

Includes:

  • (1) ProTek R/C Battery
  • (1) 8mm to T-style Charge Lead w/2mm Balance Connector
  • (2) 8mm Bullet Connectors

Notes:

No prep drag racing, compared to other RC racing disciplines, puts a much greater load on race packs. ProTek drag racing batteries are built to provide the highest level of performance and are warrantied against manufacturing defects for up to 1 year. This covers packs that may arrive with a dead cell, or are puffed/swollen prior to use. Damage caused by over discharge, improper maintenance or other user induced damage (increased IR, damaged hard case, puffing) is not covered under this warranty.
While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack.

features

  • Designed for RC enthusiast who demand the most from their systems
  • More runtime, with a dramatic increase in voltage and punch
  • Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
  • Improved efficiency, lower operating temperatures, and lower internal resistance!
  • More capacity gram for gram when compared to standard LiPo cells
  • Perfect for drag racers with high power, low turn setups
  • 10C max charge rates - 1C charge rate recommended for longest life
  • 7.6V nominal voltage
  • 8mm bullets and 8mm to T-style charge lead included
LITHIUM POLYMER SAFETY INFORMATION
IMPORTANT:
1) DO NOT leave the battery in your model when charging
2) DO NOT leave unattended when charging
3) ALWAYS balance charge the battery
4) ALWAYS use a LiPo charging bag
5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
6) YOU MUST not over discharge the Li-Poly battery pack
7) READ & UNDERSTAND the instructions carefully before operating this battery

Specs

Battery Model: 2S HV LiPo
Type: Silicon Graphene
Voltage: 7.6V
Capacity: 8800mAh
Weight: 450g
Connector Type: 8mm Bullet
Balance Connector: 2mm Bullet
Number of Cells: 2 Cell
Configuration: 2S5P
Dimensions (WxLxH): 46x100x44mm
Watt Hour @7.6V: 66.9 Wh
Burst Current: 200C
Specs

Product Specifications

Part NumberPTK-5135-22
Battery ChemistryLiHV
Battery Voltage7.4V (2-cell)
Capacity mAh8800
Discharge Rate200
Connector TypeBullets
Battery Model2S HV LiPo
TypeSilicon Graphene
Voltage7.6V
Capacity8800mAh
Weight450g
Connector Type8mm Bullet
Balance Connector2mm Bullet
Number of Cells2 Cell
Configuration2S5P
Dimensions (WxLxH)46x100x44mm
Watt Hour @7.6V66.9 Wh
Burst Current200C
Reviews
Questions & Answers

Sort By: 

No questions yet. Be the first to ask the question!