Losi K&N DBXL 1/5 4wd RTR Buggy with23cc Gasoline engine

Stand out from the crowd and push the limits of RC performance with the Losi® K&N 1/5-Scale Desert Buggy XL. This edition of the hard-hitting Losi Desert Buggy XL comes prepared to take names with an officially licensed K&N body on the outside and genuine K&N air filter inside. The Desert Buggy XL was designed to withstand the rigors of intense off-road driving with a terrain-killing 4WD drivetrain, injection molded roll cage, and 4mm aluminum chassis. Under the hood drivers will find a 23cc gasoline engine that’s sure to make your presence known and a gas tank that delivers over 40 minutes of relentless action on a full tank.

• K&N is recognized as a world leader in filter technology. Instant credibility in the motorsports world.
• Genuine K&N Air Filter, Increased air flow for increased engine performance.
• Established and proven DBXL Chassis. Affordable, durable large scale vehicle.
• 4wd performance and drivabitlity.
• 23cc Gasoline Engine. Easy to use, reliable, upgradeable.
• Roll Cage protects chassis and can be removed by taking of only 10 body clips.
• 24mm Hex Standard Hex size in 1/5th scale vehicles. Allows for use of multiple tire and wheel combinations.
• Sealed differentials last longer and provide endless tuning options.

Type: 4WD RTR Off-Road Gas Buggy
Scale: 1/5
Length: 30.75 in (781mm)
Width: 19.1 in (485.1mm)
Height: 12.25 in (311.1mm)
Ground Clearance: 3.1 in (78.7mm)
Wheelbase: 22.0 (558.8mm)
Weight: 28.7 lb (13.01 kg)
Chassis: 4mm Plate, 6061-T6 Aluminum
Suspension: Independent
Drivetrain: 4WD
Tire Type: All-Terrain 7.8 in (198.1mm) Diameter
Motor or Engine: Pull start 23cc gasoline
Radio: Spektrum DX2E 2-Channel
Servos: Installed 30 kg Servo
Batteries: Dynamite 1700 mah Receiver Pack
Wheel Size: 4.75 in (120.65mm)
Kit/RTR: RTR
Shock Type: Oil-Filled, Coil-over Springs
Body: Panels, Silkscreened
Ball Bearings: Full Ball Bearing Drivetrain
Fuel Tank Capacity: 740cc
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: No
Officially Licensed Multi-Panel K&N Body:
The Losi® K&N Desert Buggy XL™ comes screened with officially licensed body with officially licensed K&N graphics.

Genuine K&N Air Filter:
Under the hood, drivers will find a custom K&N air filter designed to push the Desert Buggy XL to its performance limit. K&N air filters consistency give drivers the edge and the filter on the K&&N Desert Buggy XL™ is no different.

Durable 4mm aluminum chassis:
This massive 1/5-Scale buggy is built on an equally rugged, relentless and durable 4mm chassis. Reinforced for the trials and tribulations of off-road conditions the Losi K&N Desert Buggy XL won't back down when pushed to its limits.

Powerful 23cc Gasoline Engine:
The K&N Desert Buggy XL comes equipped to impress with a Dynamite™ 23cc pull start engine that delivers over 40 minutes of performance on a full tank all with the distinctive roar you can only find with gas engines.

Oil-Filled, Coil-Over Shocks:
Just like its full-scale inspirations the Desert Buggy XL comes equipped to handle the brutality of the off-road like a champ with oil-filled, coil-over shocks and an independent suspension system.

Integrated Adjustable Servo Saver:
For better protection from environmental hazards, an integrated adjustable servo saver ensures that the maintenance on the Desert Buggy XL will be kept to a minimum.

All-Terrain Tire Treads:
To deliver the best off-road experience possible the Desert Buggy XL utilizes rugged all-terrain tires that can conquer nearly any terrain and compliment the sheer size of the Desert Buggy XL.

Sealed Differentials:
The Desert Buggy XL comes with completely sealed differentials that feature virtually endless tuning ability and an extended lifespan.

Rigid Injected Molded Cage:
The realistic cage provides added durability when absorbing impacts. Best of all its unique design allows the body and cage to be easily removed for easy access to the chassis.