The Kyosho FW06 GP Subaru Imreza WRC ReadySet 1/10 Nitro Touring Car offers user-friendly with mild control response, making the FW-06 a great introduction to GP touring cars. 2-speed automatic transmission combines with the high-power KE15SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset.
Equipped with the 2.4GHz Syncro KT-231P+ transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P+ also features a failsafe function that automatically reduces the throttle if radio signal is interrupted *check setting before first run*. Simply switch the power on and you can be on the track and clocking race-winning times straight away.
- Fully-assembled chassis complete with pre-set control linkages
- Installed KE15SP engine with recoil starter
- Special manifold and tuned muffler
- Finished pre-cut, pre-painted body
- Syncro KT-231P+ transmitter
- (8) AA batteries for radio system
- Fuel bottle
- Plug heater
- Equipped with KE15SP engine with slide carburetor fitted with slow idle adjustment.
- Universal swing shafts included on front.
- Turnbuckle tie-rods used for steering rod and rear upper arms for adjustable alignment.
- KYOSHO's proven center-shaft drive 4WD provides light control response.
- Disk brakes deliver reliable and responsive braking control.
- Unique compact recoil starter starts the engine with a few pulls of the starter cord.
- Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification.
- Fitted with tuned muffler.
- High-grip rubber tires with inner sponge supports are pre-mounted.
- Compatible with many FW-05 parts. *Not compatible with some parts*.
Height: 100mm (approx.)
Ground Clearance: 5mm
Tread (F/R): 176mm
Tire (F/R): 66×25mm
Gear Ratio: 7.47 / 5.44:1
Weight: 1,800g (approx.)
Engine: KE15SP with recoil starter
Part Number KYO33209 Scale 1/10 Drivetrain 4WD Kit Type RTR Length 372mm Width 200mm Height 100mm (approx.) Ground Clearance 5mm Wheelbase 258mm Tread (F/R) 176mm Tire (F/R) 66×25mm Gear Ratio 7.47 / 5.44:1 Weight 1,800g (approx.) Engine KE15SP with recoil starter
- Questions & Answers
- Must be logged in to ask a question.
Sort By:No questions yet. Be the first to ask the question!