JConcepts 1/10 Pin Swag 2.2" 4WD Front Buggy Tires, Pink (2)

Now optimized as a 4wd front tire, the pins themselves are round and crisp to the top where they climax to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge giving steering control.

The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile and wide-body carcass rolls through the turns and transitions well at high and low speeds.

A unique feature on the Pin Swag and many of the JConcepts carpet | turf racing tires, is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue and the geometry gives many edges and ledges to adhere to. Offered in 2.2” bead mounting diameter to fit popular wheels, available in bright white and florescent yellow.