HPI Racing RS4 Sport 3 Flux Ford GT LM Heritage Edition Brushless RTR

The amazing Ford GT helped launch the "retro classics" era of modern supercars, and now you can get it on the superb HPI Racing RS4 Sport 3 chassis - and already painted in its ultimate classic racing livery colors! Fitted with color-matching wheels, this car is an immediate head-turner and is ready to hit amazing top speeds thanks to its HPI FLUX power!

The RS4 Sport 3 FLUX features full-time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4 GHz electronics/radio gear, fully independent double wishbone suspension and adjustable oil-filled shocks so it’s Ready to Rock in any condition. Propelling the RS4 Sport 3 to speeds over 113km/h (70mph) is the Flux MMH-4000KV motor, controlled by the waterproof FLUX EMH-3S LiPo-ready speed controller. An enclosed box houses the 2.4GHz radio receiver, ensuring that you have constant control through the HPI pistol-grip steering wheel transmitter.

Designed to celebrate the Ford Motor Company's 100th year anniversary in 2003, the Ford GT brought back the look of the GT40 racer that dominated Le Mans from 1966 to 1969, including the legendary 1-2-3 finish in 1966. The Ford GT featured several innovative technologies for production cars of its time, and with a production run of just 4000 vehicles, it remains a collectible retro classic. The supercharged 5.4 liter V8 engine was capable of pushing the car to over 200 mph, and with the 6-speed manual transmission and helical limited-slip differential 0-60 times as low as 3.3 seconds were recorded. This is your chance to own and drive the Ford GT for yourself!

Length: 431mm (17")
Height: 127mm (5")
Width: 200mm (7.9")
Wheelbase: 254mm (10")
EASY TO DRIVE WITH A REAL STEERING WHEEL CONTROLLER!:
The HPI Racing RS4 Sport 3 is super-easy to drive and get familiar with – all you have to do is plug in the included battery and switch on the radio, then the car. It’s that easy! To drive the car, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - then release and push away again to go into reverse. It takes seconds to get used to this easy operation, and pretty soon you'll be racing with your friends!

REAL RUBBER TIRES AND COMPETITION WHEELS:
The HPI Racing RS4 Sport 3 features a set of treaded rubber tires for maximum grip on just about every paved surface. You'll get great acceleration, braking and cornering performance from these semi-slick, grippy rubber tires! The tires are molded in a durable, long-wearing rubber compound that will give you a long life for hours of fun and enjoyment. Each tire is securely glued to a cool-looking competition style wheel, molded from flexible yet firm plastic. The color is molded permanently into the plastic, so it'll still look great even after any crashes or scrapes! If you want to customize your RS4 Sport 3, you can always swap out or replace the wheels and the tires mounted to them, just like a real car!

ONE-PIECE MOLDED CHASSIS:
The RS4 Sport 3 main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

LOW PROFILE LAYOUT DESIGN:
One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

3S LIPO CAPABLE:
The RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one.

FITS A WIDE VARIETY OF BATTERIES:
The RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.

HPI FLUX TECHNOLOGY FOR ULTRA-FAST SPEEDS:
What sets apart the RS4 Sport 3 Flux from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The RS4 Sport 3 Flux is fitted with the awesome Flux MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust Flux EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a Dean's plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!
*To achieve 70mph you will need the HPI114569 - HIGH SPEED GEAR SET and HPI106401 - PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack

DOUBLE-WISHBONE FULLY ADJUSTABLE SUSPENSION:
The suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.