• Attention: Please allow additional time for shipping with USPS. If delivery time is critical, please consider using UPS at checkout.

Welcome to Larry's Performance R/C's Online

Ken Block '65 Mustang 1/10 4WD Hoonicorn


LOADING IMAGES
Ken Block '65 Mustang 1/10 4WD Hoonicorn
$299.99
HPI Racing model #HPI115990, 1/10 scale 1965 Ford Mustang Hoonicorn RTR 4WD inspired by Ken Block's Gymkhana SEVEN video has high traction and lets you do the same stunts that he does.

Availability: Please call for availability
We might still have one laying around..

* Some of the items on this site are still being inventoried if you want to confirm the item is in stock please contact us.
Overview

Overview

The full-size Hoonicorn RTR is the amazing car featured in Ken Block's Gymkhana SEVEN video that sent the motorsport fans into a frenzy - and now YOU can have a 1/10th scale version to drive yourself! Replicating the chopped, slammed and massaged look of the real 1965 Ford Mustang the Hoonicorn RTR is based on, the official HPI Racing replica version features the same gigantic supercharger air scoop, same paint scheme and even the same wheels as the real thing! With a high-traction full-time shaft 4WD providing the go power, this electric-powered version will let you pull off the same wild action as Ken Block himself - in 1/10th the size!

There will only ever be one Hoonicorn RTR - but now YOU could be driving the official scale radio-control replica!

Includes:

  • 4 AA batteries
  • 7.2v 2000 mAh NiMH battery with standard plug
  • Wall battery charger

Specs

Length: 431mm (17")
Height: 127mm (5")
Width: 200mm (7.9")
Wheelbase: 254mm (10")

Features Overview

ONE-PIECE MOLDED CHASSIS:
The RS4 Sport 3 main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

LOW PROFILE LAYOUT DESIGN:
One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for enhanced cornering capabilities.

2S LIPO CAPABLE:
The RS4 Sport 3 features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one.

FITS A WIDE VARIETY OF BATTERIES:
The RS4 Sport 3 chassis can fit lithium-polymer and nickel-cadmium packs of various sizes, including the extra-long 7-cell Ni-MH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.

FULL-TIME FOUR-WHEEL DRIVE:
The RS4 Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.

SEALED SHAFT DRIVETRAIN:
The drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.

BOTTOM-ACCESS DRIVESHAFT:
The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car.

OPTION: CARBON FIBER DRIVESHAFT COVER:
You can easily replace the stock driveshaft cover on the bottom of the chassis with a carbon fiber cover that provides extra stiffness and extra-cool looks.

EASY ACCESS DIFFERENTIALS:
Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.

4-GEAR METAL DIFFS:
Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.

OPTION: DIFF SPOOL:
The optional diff spool removes all diff action for direct traction and braking action from your trigger finger straight to the wheels.

DOUBLE-WISHBONE FULLY ADJUSTABLE SUSPENSION:
The suspension of the RS4 Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.

RUGGED SPRING-LOADED SERVO SAVER:
Fitted to the HPI SF10W waterproof servo is an adjustable multipiece servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo internals from the impact!

CUSTOMIZE YOUR LOOK:
A huge variety of option bodies, wheels and tires from HPI lets you fully customize the style of your RS4 Sport 3 to suit your style.

BODY CHOICES:
You can fit any 1/10th scale touring car body from HPI Racing onto the RS4 Sport 3, from hot hatches to supercars, pick-up trucks to supertouring racers. All you need to do is adjust the body mounts front and rear to allow the wheels to fit underneath the body properly. A simple system using body pins hold the mounts in place, and you can fine-tune the fit to get the exact ride height you want.

Specs

Product Specifications

Part NumberHPI115990
Scale1/10
Drivetrain4WD
Kit TypeRTR
Length431mm (17")
Height127mm (5")
Width200mm (7.9")
Wheelbase254mm (10")
Reviews
Questions & Answers

Sort By: 

No questions yet. Be the first to ask the question!
Part List