XR10 Pro 5.5T 5900Kv Sensored Brushless ESC / V10 G3 Motor combo

This is a Hobbywing XR10 Pro 5.5T 5900Kv Sensored Brushless ESC / V10 G3 Motor combo

• ESC
• 10 select-to-use profiles including zero-timing/blinky mode, modified mode, stock mode applicable to all 1/10th touring car, pan car and buggy racing.
• Internal electronic key switch for
• Long service life
• High reliability
• Neat wiring
• Built-in switch mode BEC with a maximum output of 4A and voltage adjustable between 6V and 7.4V for usage with high voltage servos.
• Separate PRG/FAN port is able to power an external fan for maximize cooling performance or connect a LCD program box or WiFi module to the ESC.
• With the optional WIFI express module from Hobbywing (HWA30503000 - not included) users are able to program parameters, upgrade firmware and check relevant data during the event using either the Iphone or Andriod devices.
• Brake and throttle adjustment: 100 levels of brag brake, 50 levels of initial brake force, 9 levels of maximum brake force, 20 levels of brake rate, and 30 levels of throttle rate.
• Adjustable brake mode, PWM and brake frequencies and for different competitions and control feel.
• Adjustable Turbo Timing & Boost Timing for different applications.
• Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail safe (throttle signal loss protection).
• Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real time.
• Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).
• Motor
• RPM Significantly Improved (for Stock Spec): The G3 Stock Spec motor has its torque and KV rating improved by 4% and 16%
• First-rate Linearity: The built-in high precision Hall sensor combined with the high precision and balanced rotor will guarantee remarkable linearity of the motor.
• Super Lightweight: The G3 Modified & Stock motors only weigh 161g and 132g respectively; the weights are reduced by about 11% & 21% when comparing with the V10 G2 motor.
• Asymmetric Bearings: By comparison (with the V10 G2 motor), for improving the load-carrying capacity, the size of the front bearing of the G3 motor is increased by 26% ; while for lower resistance, the size of the rear bearing is reduced by 6%. The asymmetric bearing design will make the motor running more stable and smooth.
• Great Heat Dissipation: The special shell design which makes the stator core (/laminations) expose to the air will maximize cooling, the big holes(*) on the front & rear end plates will guarantee outstanding heat dissipation of the motor.
• Stepless Adjustable Mechanical Timing: The mechanical timing can be adjusted finely and smoothly; the skid-proof lines at the rear end of the motor will guarantee stability of the timing after adjustment
• Re-buildable Structure: The detachable structure design for regular cleaning & maintenance will effectively prolong the service life of the motor and retain its efficiency.
• Two Different End Plates: The end plates with big holes adopted by the 3.5T~5.0T & 10.5T~21.5T motors will guarantee excellent heat dissipation of the motor for on-road applications. The end plates with small holes used by the 5.5T~8.5T motors will effectively prevent sand or dirt from getting inside and damaging the motor for off-road applications. Users can purchase and mount the end plates with big or small holes as per actual needs.
• High-quality Components: The use of high-performance stator core (/laminations), heat(200℃)-resistant pure copper wire, heat(200℃)-resistant rotor with strong structure, international top brand high-precision and high strength bearings, and copper solder tabs with super current endurance will guarantee excellent performance and great durability.

ESC:
ID: XR10 PRO ESC 30112600 (Black)
Scale: 1/10th Brushless Sensored ESC
Cont./Peak Current: 160A/1200A
Power input: 2-3S LiPo/4-9 Cell NiMH
BEC output: Swich Mode：6V/7.4V,4A
Wire input: Black-12AWG-200mm*2
Wire output: Black-12AWG-200mm*3
Size: 37.5x30.9x31.6mm (w/Fan & Fan Shroud)
Weight: 95g(w/ Wires)
Cooling Fan: 25.0x25.0x10.0mm
Voltage Range: 5V-7.4V (powered by BEC)
Application: 1/10th Touring Car, Buggy, Drift Car, F1; 1/8th, 1/10th Rock Crawler
Motor: Brushless sensored motor
KV Rating/T Count:
2S LiPo/6S NiMH: (Touring Car) T≥3.5T, (Buggy) T≥4.5T.
3S LiPo/9S NiMH: (Touring Car) T≥6.5T, (Buggy) T≥8.5T.
Motor:
Pole Count: 2
KV Rating: 5900
LiPo Cells: 2S
No Load Current: 5A
Max Power Output: 426W
Amps at Max Power Output: 115A
Outer Diameter: 35.9mm
Length: 50.0mm
Shaft Diameter: 3.17mm
Shaft Length: 14mm
Weight: 163g
Rotor: 5-12.5
Timing: 20-50 degrees (adjustable)
Applications: Modified 1/10 4wd off road road racing