Team Durango 1/10 DEX410v4 Buggy EP 4WD Kit

Chassis: Aluminum 0.08" (2mm) thick
Drive: Four wheel shaft drive
Shocks: Aluminum body, big bore oil-filled type (oil not included)
with titanium nitride shafts for smooth action and increased
durability and longevity
Shock Towers: Carbon fiber 0.16" (4mm) thick
Body: Clear polycarbonate with rear wing and decals
Transmission: Single speed with quick release slipper clutch
Spur Gear: Composite construction 48 pitch 87 tooth, quick release
design
Differentials: Bevel gear
Wheels: Dish type, yellow in color 14mm hex 2.2" (56mm) diameter
front width 1.02" (26mm) wide, rear width 1.5" (38mm) wide
Suspension: Single hanger for rear suspension allows easier and
faster anti-squat adjustment
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

Team Durango DEX410v4 Buggy Kit with Wheels, Body with Wing, Decals
Diff Oil, Thread Lock and Instructions

Radio: 2-channel with high torque steering servo
Electronic Speed Control: To match selected motor
Motor: Brushless
Pinion Gear: 48 pitch, number of teeth to be determined by motor
choice
Battery: LiPo Battery: 2S 7.4V saddle pack
Battery Charger: To match selected battery
Tires: 1.02" (26mm) front, 1.5" (38mm) wide rear
Shock Oil: Silicone, slightly heavier weight recommended for front
Building and track equipment

Vehicle-
Length: 13.75" (349mm)
Width: 9.8" (249mm)
Wheelbase: 10.9 - 11.2" (278-285mm) adjustable
Internal Gear Ratio: 2.47:1
Weight: 61.7oz (1750g) ready to race
Body-
Length: 10.5" (266mm)
Width: 4.4" (112mm)
Height: 2.5" (63mm)