1/10 Mamba Max Pro ESC with 2400Kv Sensorless, Brushless Motor

This is the Castle Creations 1/10 Mamba Max Pro Speed Control System with 2400Kv Sensorless, Brushless Motor.

• Rated for 4S maximum input
• Suitable for use with stock gearing on AWD (all wheel drive) vehicles in basher applications
• Switching BEC provides power for servo and receiver all the way to 6S
• Profiles can be custom designed on a PC with the Castle Link PC programming software (not included, requires the Quick Field Programmer, CSEM6300 and the Castle Link Quick Connect, CSEM7900)
• Infinitely adjustable throttle and brake curves with timing advance
• Punch Control allows dialing in horsepower where needed
• Brake Strength allows straight tracking under hard braking
• Drag Brake helps entry into corners
• Start Power for smooth launches
• Four pole motor
• Replaces 550 size motors
• Powerful 2400kV motor

- Electronic Speed Control:
Cells: 6-12 NiCd/NiMH, 3-4 cell LiPo
Brake: Proportional
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 45.5mm x 36.5 x 21.5mm (1.79"x1.44"x0.85")
Weight: 81g (2.8oz)
- 2400Kv Motor:
Input Voltage: Max of 4S LiPo (14.8V) or 14 cell NiCd/NiMH (16.8V)
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Weight: 10.6oz (301.5g)
Shaft Diameter: 1/8" (3.715mm)
Connector Type: 4mm bullet type connector
Motor Wire Length: 4" leads (101mm)