Lunsford Racing 3/4mm Titanium Turnbuckle Kit (All Slash 2wd)

This is a 4mm Titanium Turnbuckle upgrade kit that greatly increases turnbuckle strength. This kit is especially designed for those that currently have plastic links, are using older generation 3mm diameter turnbuckles or for those that want a stronger option than Chinese steal. If you are upgrading from plastic links or 3mm links you will need the Traxxas rod ends listed below. We include the fasteners where needed.

Features:

• 4/5mm nut for easy turnbuckle adjustment.
• Increased strength and reduction in weight compared to plastic and/or steel links.
• Converts lower end models or older models to fully adjustable 4mm turnbuckles.
• All necessary fasteners included for the conversion (Rod ends are not included for those that are upgrading from plastic links or 3mm diameter tie rods. Rod ends needed are noted below).
• Grade 5 Titanium is roughly a 45% weight savings over steel.
• Anti-corrosion properties are greater than stainless steel.
• Nano accurate thread rolling process
• A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
• Machined from Made in the USA center-less ground titanium.
• From raw material to the finished product, all of our Grade 5 titanium born and bred in the USA.
• Designed, developed and crafted right here in Albany, Oregon USA at the Lunsford compound.
• All Lunsford Titanium Turnbuckles come with a 100% Guarantee!
• In the rare instance your turnbuckle bends or breaks, we will replace it for free. Our Guarantee.

Includes:

• (1) 3x38mm PUNISHER Titanium Turnbuckle (Servo). For use with TRAXXAS rod end TRA2742
• (4) 4x40mm Titanium Turnbuckles (Front & Rear Camber) For use with TRAXXAS rod end TRA5525
• (2) 4x60mm Titanium Turnbuckles (Steering). For use with TRAXXAS rod end TRA5347
• (6) 3x16mm Phillips Head Screws. For use when upgrading from plastic links (rear camber link, inner front camber link)
• (6) 3x20mm Phillips Head Screws. For use when upgrading from plastic links (outer steering, outer front camber link)
• (6) 3mm Zinc Nyloc Nuts. For use when upgrading from plastic links (steering links, outer front camber link)