- Overview
Overview
Can fly the Blade CX/CX2 helicopter higher and smoother
Right size, fits perfectly in CX2. NO modification needed! Same discharging and balancing connector as factory pack. It can be charged on the factory charger. Plug and Play!
Continuous Discharge Rate: 25C / 22A. Burst Discharge Rate: 50C / 45A
Dimension: 68.2x 24.5 x 12.2 mm. Weight: 45.3g / 1.6ozNotes:
* ONLY use a LiPo Balance Charger for charging this battery.
* DO NOT use a NiMH battery charger to charge this battery.
* INSPECT battery pack for damage (puffiness, broken wires, punctures, etc). If damaged DO NOT charge.
* Failure to follow these warnings may result in fire or personal injury.features
- Wanna fly the Blade CX/CX2 helicopter higher and smoother? Try this new 25C pack specially designed for Blade CX2 helicopter.
- The newest battery upgrade for the E-flite Blade CX and CX/2
- Gain 12% more flight time over stock battery
- Delivers more than twice the power with its 25C rating - beyond almost any other battery
- Fits the stock battery tray perfectly and work with the stock charger.
- This Tenergy Lithium polymer battery is rated at 900mAH 25C and is made for the Blade CX and CX/2, while the stock battery is rated at 800mAh; it means this Tenergy battery will provide much longer runtime. This battery will work with the e-flight charger and fits inside the CX helicopter without any modifications - direct replacement but a better battery; great quality and an exceptional value!
Continuous Discharge Rate: 25C / 22ASpecs
Burst Discharge Rate: 50C / 45A
Discharge (Output) Leads: 20 AWG silicon wire, 97 mm long, JST(BEC) connector (Same as the factory pack)
Charging (Balancing) Lead: JST(Align, E-flight) Style 3-pin connector. 24AWG PVC wire, 38 mm Long (Same as the factory pack)
Dimension: 72x 24.5 x 12.5 mm
Weight: 43g / 1.6oz- Specs
Product Specifications
Part Number TEN31134 Battery Chemistry LiPo Battery Voltage 7.4V (2-cell) Capacity mAh 900mAh Discharge Rate 25C Connector Type JST Continuous Discharge Rate 25C / 22A Burst Discharge Rate 50C / 45A Discharge (Output) Leads 20 AWG silicon wire, 97 mm long, JST(BEC) connector (Same as the factory pack) Charging (Balancing) Lead JST(Align, E-flight) Style 3-pin connector. 24AWG PVC wire, 38 mm Long (Same as the factory pack) Dimension 72x 24.5 x 12.5 mm Weight 43g / 1.6oz - Reviews
- Questions & Answers
- Must be logged in to ask a question.
Sort By:
No questions yet. Be the first to ask the question!