1/10 RC10TC7.1 Factory Team Touring Car Kit

Chassis: Graphite laminate 0.088" (2.25mm) thick with optimized
flex characteristics
Drive: Four wheel belt drive, DCV front driveshaft assemblies
Rear Differential: Gear type
Shocks: Fox shocks with genuine Kashima coat
Motor Mount: Redesigned one-piece, centrally located to produce the
most consistent chassis flex for predictable cornering
Steering: Updated dual bellcrank system with low CG and refined
Ackermann range for best performance on any track condition,
Ackermann refers to the effect of the inside wheel front wheel
turning faster than the outside front wheel during turns, floating
steering servo mount
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 22 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

RC10TC7.1 Factory Team Touring Car Kit, Shocks, bottle of Silicone
Shock Fluid and Silicone Diff Fluid, Decal Sheet and Instruction
Manual

Radio: 2-channel with high-speed steering servo
Motor: 540 size brushless
ESC: To match selected motor
Battery: 3.7V-7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear: 48 pitch, number of teeth to be determimed by motor and
track conditions
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale polycarbonate touring car
Paint, building and track equipment

Length: 14.17" (360mm)
Width: 7.48" (190mm)
Wheelbase: 9.9 - 10.1" (253.5 - 257.5mm)
Internal Gear Ratio: 2.0:1
Weight: 1.12lbs (508g)